Pumps with peripheral impeller 

Performance Range: 

Flow rate up to 40 l/min 

Head up to 38 m

E-SERIES COMMERCIAL PERMANENT MAGNET INVERTER PUMP

TDM SERIES COMMERCIAL PERMANENT MAGNET INVERTER PUMP

HOUSEHOLD PERMANENT MAGNET VARIABLE FREQUENCY PUMP

Pumps with peripheral impeller 

Performance Range: 

Flow rate up to 80 l/min 

Head up to 90 m

Working Conditions
1. Flow Range: 3.2~500 M³/H
2. Head Range: 8~588 M
3. Power Rnage: 3~75 KW
4. Medium Temperature: ≤20 °C
5. PH Range： 6.5~8.5

1. The pump is close coupled with the electric motor. It runs in the water, which is safe and reliable.
2. There is no special requirement for well pipes and lifting pipes (i.e.: it can run in steel tube well, lime well and soil well. if the pressure permitted, steel, rubber, plastic pipe can be used as lifting pipes).
3. Installation, running and maintenance is convenient and simple. It is less space demand, so there is no need to build a pump station.
4. Simple structure, less material demand.

Replaceable membrane pressure tanks

Carbon steel

Working temperature:

Butyl:-20℃/99℃

Epdm:-20℃/99℃

Natural rubber:-0℃/77℃

1.pressure switch used in water sysytems.

2.the swith start and stop the water pump automatically according to the pressure setting pressure value,stopping the water pump in the case of water shortage

1. Liquid Temperature: +2℃~+100℃
2. Maximum Ambient Temperature: +40℃
3. Maximum System Pressure: 10bar
4. Protection Level: IP44
5. Mains Connection: 220V/50Hz
6. Insulation Class: H
7. Pumped Liquid Characteristics: Clean, Free From Solids And Mineral Oils, Non-Toxic, Chemically Neutral, Close To The Characteristics Of Water
8. Installation: The Motor Shaft Must Be Kept In Horizontal Direction
9. PH: 6.5 To 8.5